Furniture. Sunday , January 28th , 2018 - 13:40:25 PM
Integrating a wine glass rack in the kitchen can be a problem, usually because of the lack of space. However, certain types are created specifically to let you get around this problem, like this one hanging from the ceiling, above the kitchen island which also serves as a bar. A rustic wine glass rack can be made of wood and attached to the ceiling using metal chains. It can be a simple DIY project and it would look beautiful in an industrial or rustic space, with a wooden ceiling, exposed beams and rough finishes.
Our enthusiasm for DIY projects involving Ikea products led us to explore a bit more the versatility of the Ikea Lack Table. There’s actually a whole series entitled like that and it includes a TV unit, coffee table, side table and some wall shelves. Today we’ll only focus on the tables, trying to find ways to integrate them into ingenious projects. Let’s start with a simple transformation. For this project you can use either a Lack or a Hemnes table which are both Ikea coffee tables. Get some wooden boards and cut them to size so you can make a tabletop. Stain them and measure the center of the table so you know where to place the first board. Clamp each end down and then add the others the same way. Glue and screw all the boards, turn the table upside down and put something heavy on the middle. Let it sit overnight, add more screws in the center of each board but on the underside so you don’t see them.
A wonderful idea if you want to make a mirror frame that looks rustic is to use pallets. You don’t have to build the frame from scratch, if the mirror already had one. Just one pallet wood to frame it. Cut four pieces of wood, arrange them and glue them to the existing frame and mirror.. Then use nails to keep them in place. With this method you can also adjust the shape and size of a mirror without havign to cut it. The best way to get a rustic look is by using weathered wood. To build a mirror frame similar to this one, use 4-6 mirror clips and some lumber. Cut the wood pieces and screw them together. Check to see if the mirror fits and then mark where you want to add the clips. Attach the clips and make sure they’re not too tight.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does leakymug.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.