Furniture. Monday , January 29th , 2018 - 12:34:14 PM
It had a simple design, with a raw-edge wooden headboard attached to the wall. The headboard wasn’t attached to the bed frame so when the entire structure was pulled up to free up the floor space, this accessory remained on the wall, serving as a decoration. Adding a hanging bed with a pulley system to a cabin was a clever move and a practical decision taken by the designer. Given the limited floor space, this allows a single room to change function easily, transforming from a bedroom into a living space.
Our enthusiasm for DIY projects involving Ikea products led us to explore a bit more the versatility of the Ikea Lack Table. There’s actually a whole series entitled like that and it includes a TV unit, coffee table, side table and some wall shelves. Today we’ll only focus on the tables, trying to find ways to integrate them into ingenious projects. Let’s start with a simple transformation. For this project you can use either a Lack or a Hemnes table which are both Ikea coffee tables. Get some wooden boards and cut them to size so you can make a tabletop. Stain them and measure the center of the table so you know where to place the first board. Clamp each end down and then add the others the same way. Glue and screw all the boards, turn the table upside down and put something heavy on the middle. Let it sit overnight, add more screws in the center of each board but on the underside so you don’t see them.
Once you cut the board to size, set the mirror in the middle and measure and cut the trim pieces. Then stain each piece except for the detailed trim pieces. You may need to sand them first if the wood is treated. Leave them to dry and during this time spray paint the remaining trim pieces white. Only do one coat. Then attach the mirror to the board with wood glue, add the trim pieces and enjoy. A different design can feature a simple frame with straight cuts. You can build it yourself or use one you already have. If you choose the first option, secure the boards together with screws and make some holes for carriage bolts. Then stain the frame and seal it. Allow it to dry. To attach the mirror to the frame, use a picture hanger and basic mirror hooks.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does leakymug.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.